Deformation-sensitive SAW generator

Authors

  • V. O. Piddubnyi National Technical University of Ukraine, Kyiv Politechnic Institute, Kiev
  • V. V. Piddubnyi National Technical University of Ukraine, Kyiv Politechnic Institute, Kiev

DOI:

https://doi.org/10.20535/RADAP.2006.33.66-70

Keywords:

surface acoustic waves, generator, sensor, delay line

Abstract

The article deals with the issues of deformational and heat sensitivity of the generators on the surface acoustic waves. Description and results of research are shown

Author Biographies

V. O. Piddubnyi, National Technical University of Ukraine, Kyiv Politechnic Institute, Kiev

Піддубний В.О., к.т.н., доцент кафедри радіотехнічних пристроїв та систем

V. V. Piddubnyi, National Technical University of Ukraine, Kyiv Politechnic Institute, Kiev

Піддубний В.В., інженер

References

Дворников А.А., Огурцов В.И. Уткин Г.М. Стабильные генераторы на поверхностных акустических волнах. - М.: Радио и связь, 1983.-136 с.

Речицкий В.И. Акустоэлектронные радиокомпоненты. - М.: Радио и связь, 1987. - 192 с.

Піддубний В.О. Вимірювальні перетворювачі тиску рідині та газу.// Інформатизація та нові технології. – 1995. - №2. – с. 14 - 16.

Башкатов Р.С., Гурбик В.В., Соколов С.В., Тептюк С.В. Разработка и исследование датчиков давления на ПАВ.// Материалы конф. «Акустоэлектронные устройства обработки информации». – Черкассы, 1990.

Поддубный В.А., Михацкий А.Ю., Башкатов Р.С. Измерительный преобразователь на основе дифференциальных каскадов.// Механика гироскопических систем. – 1994 - № 13. – с. 117 - 120.

Downloads

How to Cite

Піддубний, В. and Піддубний, В. (2006) “Deformation-sensitive SAW generator”, Visnyk NTUU KPI Seriia - Radiotekhnika Radioaparatobuduvannia, 0(33), pp. 66-70. doi: 10.20535/RADAP.2006.33.66-70.

Issue

No. 33 (2006)

Section

Telecommunication, navigation, radar systems, radiooptics and electroacoustics

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).