Functional parameters of radio-electronic system stipulated by thermal processes in it

Authors

  • Yu. F. Zinkovskiy National Technical University of Ukraine, Kyiv Politechnic Institute, Kiev
  • B. M. Uvarov National Technical University of Ukraine, Kyiv Politechnic Institute, Kiev http://orcid.org/0000-0003-3375-6181

DOI:

https://doi.org/10.20535/RADAP.2014.58.90-103

Keywords:

electronics, the unit cell, microassemblies, model of two-terminal, thermal model, temperature of elements, the automated designing programs

Abstract

Statement of the problem. The features of thermal processes in the structural modules of radio-electronic apparatus -сells and microassemblies, elements of their electronic structure are reviewed.
Internal thermal processes. The internal thermal processes in elements of electronic structure are considered. Efficiency factor of modules, energy efficiency indicators of resistors, capacitors, inductances based on models of equivalent two-terminalare analyzed.
The basic structural elements of radioelectronic devices. The design feature of cells and mikroassemblies are considered.
Thermal field of a cell and microassembly. The basic mathematical models to determine the temperatures of the elements of cells and microassemblies electronic structure are proposed. Thermal field of microassemblies is modeled, analytical equation for determin ing the temperature of all its elements is obtained.
Account of temperatures of microassembly. The results of imitating modeling of temperatures microassemblies with various conditions of cooling are submitted.
Software definition of temperatures for cells and microassemblies. The automated designing programs for the temperature modes account in cells and microassembly of the radio-electronic are described.
Conclusions. The primary tasks performed in the work are listed.

Author Biographies

Yu. F. Zinkovskiy, National Technical University of Ukraine, Kyiv Politechnic Institute, Kiev

Doc. of Sci. (Techn.), Prof.

B. M. Uvarov, National Technical University of Ukraine, Kyiv Politechnic Institute, Kiev

Doc. of Sci. (Techn.), Prof.

References

Перелік посилань

Уваров Б.М. Оптимізація теплових режимів та надійності конструкцій радіоелектронних засобів з імовірнісними характеристиками / Б.М. Уваров, Ю.Ф. Зіньковський: – К. : “Корнійчук”, 2011. – 201 с.

Лыков А.В. Тепломассообмен (Справочник) / А.В. Лыков. – М. : Энергия, 1978. – 480 с.

Беляев Н.М. Методы теории теплопроводности / Н.М. Беляев, А.А. Рядно. – М. : Высш. школа, 1982. – 327 с.

Вироби електронної техніки. Методи розрахунку надійності : ДСТУ 2992-95. – [Чинний від 1996 – 01 – 01]. – К. : Держстандарт України. – 77 с. – (Національні стандарти України).

Прытков С.Ф. Надежность электрорадиоизделий / С.Ф. Прытков, В.М. Горбачева, М.Н. Мартынова, Г.А. Петров. – М. : МО РФ и НИИ “Электронстандарт”, 2004. – 620 c.

References

Uvarov B.M. and Zinkovskyi Iu.F. (2011) Optymizatsiia teplovykh rezhymiv ta nadiinosti konstruktsii radioelektronnykh zasobiv z imovirnisnymy kharakterystykamy, Kyiv, Korniichuk Publ., 201 p.

Lykov A.V. (1978) Teplomassoobmen (Spravochnik) [Heat and Mass transfer (directory)]. Moskow, Energiya Publ., 480 p.

Belyaev N.M. and Ryadno A.A. (1982) Metody teorii teploprovodnosti [Methods of the theory of heat conduction]. Moskow, Vysshaya shkola Publ., 327 p.

Vyroby elektronnoi tekhniky. Metody rozrakhunku nadiinosti : DSTU 2992-95 [Electronic devices. methods calculating the reliability: GOST 2992-95]

Prytkov S.F., Gorbacheva V.M., Martynova M.N. and Petrov G.A. (2004) Nadezhnost' elektroradioizdelii, Moskow, MO RF i NII “Elektronstandart”, 620 p.

Published

2014-09-30

How to Cite

Зіньковський, Ю. Ф. and Уваров, Б. (2014) “Functional parameters of radio-electronic system stipulated by thermal processes in it”, Visnyk NTUU KPI Seriia - Radiotekhnika Radioaparatobuduvannia, 0(58), pp. 90-103. doi: 10.20535/RADAP.2014.58.90-103.

Issue

Section

Designing of Radio Equipment