Calculations of circular waveguide with a rectangular metal insert

Authors

  • Yu. K. Sydoruk National Technical University of Ukraine, Kyiv Politechnic Institute, Kiev
  • V. M. Dovgan National Technical University of Ukraine, Kyiv Politechnic Institute, Kiev

DOI:

https://doi.org/10.20535/RADAP.2010.42.65-71

Keywords:

circular waveguide, metal insert, finite element method

Abstract

Calculated and analyzed the basic parameters of electromagnetic wave in a circular waveguide with a rectangular metal plate in the following cases: when  the circular waveguide without metal plate for a H11 wave of subcritical, critical and supercritical. For calculations was used a finite element method and Ansoft HFSS program.

Author Biographies

  • Yu. K. Sydoruk, National Technical University of Ukraine, Kyiv Politechnic Institute, Kiev
    Assoc. Prof.
  • V. M. Dovgan, National Technical University of Ukraine, Kyiv Politechnic Institute, Kiev
    Довгань В.М., студент радіотехнічного факультету

References

Сильвестр П., Феррари Р. „Метод конечных элементов для радиоинженеров и инженеров-электриков”, М., „Мир”, 1986. – 226 с.

Банков С.Е., Курушин А.А. „Проектирование СВЧ устройств и антенн с Ansoft HFSS”, М., 2009. – 736 с.

Сабоннадьер Ж.-К., Кулон Ж.-Л. Метод конечных элементов и САПР: Пер. с франц. — М.: Мир, 1989. – 190 с

Александров А.К., Ячев И.С., Маринова И.Й., Рыжов С.Ю. „Автоматизированный расчет поля электрических аппаратов методом вторичных источников” М., Издательство МЭИ, 1994, с. 4-5.

Downloads

Issue

No. 42 (2010)

Section

Electrodynamics. Microwave devices. Antennas

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

How to Cite

“Calculations of circular waveguide with a rectangular metal insert” (2010) Visnyk NTUU KPI Seriia - Radiotekhnika Radioaparatobuduvannia, (42), pp. 65–71. doi:10.20535/RADAP.2010.42.65-71.