Method of object ranging by signaling security means based on measurement of electrical capacity of sensing element

Authors

  • A. B. Dobrovolskyi National Academy of State Border Service of Ukraine, Khmelnitsky

DOI:

https://doi.org/10.20535/RADAP.2014.57.149-157

Keywords:

mikrocable, electrical capacity, distance to the object

Abstract

Introduction. Analysis of the researches in the field of signaling break-away protection means allowed to determine scientific and technical solutions which solve tasks concerning realization of object ranging. However, these scientific and technical solutions have several disadvantages, which are proposed to be solved with a new method based on measurement of electrical capacity of sensing element.
Research results. The essence of the method novelty is the object ranging based on regression analysis of experimental data in measurement of electrical capacity of the “Tros” microcable tape. This method has no restrictions as for object ranging in comparison with the method of impulse reflectometry.
Conclusions. Used method allowed to raise the efficiency of sensing element control by object ranging.

Author Biography

A. B. Dobrovolskyi, National Academy of State Border Service of Ukraine, Khmelnitsky

Dobrovolskyi A. B.

References

Перелік посилань

Пат. 1826788 Российская Федерация, МПК G08B 13/12. Сигнальное устройство / Ю.Н. Круглов, Л.Е. Лебедев, Н.Н. Токарев, А.В. Филипов, Е.Е. Шарамонов ; Научно-иследовательский и конструкторский институт радиоэлектронной техники. – № 4887358/24 ; заявл. 26.10.1990 ; опубл. 10.08.1996.

Пат. 2485596 Российская Федерация, МПК G08B 13/12, G08B 25/00, G08B 29/00. Способ определения направления движения нарушителя обрывными средствами / Удот С.А. ; Федеральное государственное образовательное учреждение высшего профессионального образования «Калининградский пограничный институт Федеральной службы безопасности Российской Федерации». – № 2011127033 ; заявл. 30.06.2011; опубл. 20.06.2013, бюл. № 17.

Пат. 17485 Україна, МПК G08B 13/02. Сигналізаційний прилад обривного типу / Б.М. Міхєєв, М.І. Лисий, О.М. Шинкарук ; Національна академія державної прикордонної служби України ; опубл. 15.09. 2006, бюл. № 9.

Добровольський А.Б. Модель оцінки ефективності технічних засобів охорони кордону при врахуванні інформаційних характеристик // Збірник наукових праць Військового інституту Київського національного університету ім. Т. Шевченка. – 2012. – Вип. № 38. – c. 25-30.

Прибор «Трос». Техническое описание и инструкция по эксплуатации. Ш1ППК4ЭТ. 1990г.

Reference

Kruglov Y.N., Lebedev L.E., Tokarev N.N., Filipov A.V. and Sharamonov E.E. (1996) Signal'noe ustroistvo [Signalling device]. Patent RU 1826788.

Udot S.A. (2013) Sposob opredeleniya napravleniya dvizheniya narushitelya obryvnymi sredstvami [Method of infractor’s direction measurement by break-away means]. Patent RU 2485596.

Mikheev B.M., Lysyi M.I. and Shynkaruk O.M. (2006) Syhnalizatsiinyi prylad obryvnoho typu [Signalling break-away device]. Patent UA 17485.

Dobrovolskyi A.B. Model otsinky efektyvnosti tekhnichnykh zasobiv okhorony kordonu pry vrakhuvanni informatsiinykh kharakterystyk [Model of assessment of the effectiveness of technical border protection means in view of information characteristics]. Herald of Taras Shevchenko National University of Kiev (Special Military science) , No 38, pp. 25-30.

(1990) Pribor «Tros». Tekhnicheskoe opisanie i instruktsiya po ekspluatatsii [“Tros” device. Technical description and operation manual].

Downloads

Published

2014-06-30

How to Cite

Добровольський, А. (2014) “Method of object ranging by signaling security means based on measurement of electrical capacity of sensing element”, Visnyk NTUU KPI Seriia - Radiotekhnika Radioaparatobuduvannia, 0(57), pp. 149-157. doi: 10.20535/RADAP.2014.57.149-157.

Issue

No. 57 (2014)

Section

Information about completed design

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Most read articles by the same author(s)