Millimeter wave range band pass filters on a coplanar waveguide basis

Authors

  • N. V. Soloshenko National Technical University of Ukraine, Kyiv Politechnic Institute, Kiev
  • M. Y. Omelianenko National Technical University of Ukraine, Kyiv Politechnic Institute, Kiev

DOI:

https://doi.org/10.20535/RADAP.2012.49.219-221

Keywords:

millimeter wave range band pass filter, coplanar waveguide, frequency converter

Abstract

This paper presents the results of development of a millimeter wave range band pass filter. Coplanar waveguide sections are used to form resonators with end coupling. Filter synthesis is made using the results of electrodynamics analysis of discontinuities in the CST Microwave Studio software. The filter developed can be used as a part of millimeter wave range frequency converter.

Author Biographies

N. V. Soloshenko, National Technical University of Ukraine, Kyiv Politechnic Institute, Kiev

Солошенко Н.В., магістрант радіотехнічного факультету

M. Y. Omelianenko, National Technical University of Ukraine, Kyiv Politechnic Institute, Kiev

Омеляненко М.Ю., ст. викладач кафедри радіотехнічних пристроїв та систем

References

Schwab W., Menzel W. Compact bandpass filters with improved stop-band characteristics using planar multilayer Structures // IEEE MTT–S Int. Microwave Symp.Dig. — 1992. —P. 1207–1209.

Гололобов В.П., Омельяненко М.Ю. Полосно-пропускающие фильтры на основе планарных металло-диэлектрических структур в Е-плоскости волновода пластинами //Известия вузов. Радиоэлектроника. – 1987. –№ 1. – C.3–15.

Downloads

Published

2012-02-27

How to Cite

Солошенко, Н. and Омеляненко, М. (2012) “Millimeter wave range band pass filters on a coplanar waveguide basis”, Visnyk NTUU KPI Seriia - Radiotekhnika Radioaparatobuduvannia, 0(49), pp. 219-221. doi: 10.20535/RADAP.2012.49.219-221.

Issue

No. 49 (2012)

Section

Information about completed design

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).