Open type coaxial sensor. Integral equation of the electric field in the aperture plane
DOI:
https://doi.org/10.20535/RADAP.2017.69.11-16Keywords:
Bessel functions, boundary conditions, eigenfunctions, Green's functionAbstract
Introduction. The open end of a coaxial line has good prospects of usage as a sensor for devices of flexi monitoring of parameters of materials in the microwave range. Its exact mathematical description requires the definition of the field in any section.Integral equation. A rigorous integral equation for the radial component of the electric field in the plane aperture is obtained. The technique of obtaining this equation is based on the method of partial areas and boundary conditions for magnetic components. The criteria of using the approximation of the given field and possibilities of the solution normalization are shown.
Conclusions. The obtained technique can be distributed to solving problems a wide class of axissymmetric microwave devices. It is the basis of further analysis of their parameters and practical calculation. Information on the normalization summarize the results and will be useful in the selecting designs of sensors.
References
Перелік посилань
Митра Р. Вычислительные методы в электродинамике / Р. Митра. - М.: Издательство Мир. - 1977. - 485с.
Van Bladel J. G. Electromagnetic fields. - John Wiley Sons. - 2007. - Vol. 19. - 1149 p.
Детинко M. B. Электродинамическая модель СВЧ-резонатора с кольцевым измерительным отверстием, нагруженного на многослойную полупроводниковую структуру / M. B. Детинко, C. A. Хоптяр // Известия вузов. Физика. - 1993. - №9. - С. 53–58.
Гордиенко Ю. Е. Приближение заданного поля в задачах определения характеристик резонаторных СВЧ - датчиков апертурного типа / Ю. Е. Гордиенко, А. Ю. Панченко, Р. С. Фар // Радиотехника: Всеукраинский межведомственный научно-технический сборник. - 1998. - Вып. 107. - С. 93–103.
Hyde M. W. Nondestructive characterization of PEC-backed materials using the combined measurements of a rectangular waveguide and coaxial probe / M. W. Hyde, A.E. Bogle, M. J. Havrilla // IEEE Microw. Wireless Compon. Lett. - 2014. - Vol. 24, No. 11. - pp. 808–810.
Hyde M. W. Nondestructive electromagnetic material characterization using a dual waveguide probe: A full wave solution / M. W. Hyde, J. W.Stewart, M. J.Havrilla , W. P. Baker, E. J. Rothwell , D. P.Nyquist // Radio Science. -2009. -Vol. 44, No. 3. - pp.1–13.
Panchenko A.Yu. Modeling a small aperture resonator type microwave meter of substance parameters / A. Yu. Panchenko // Telecommunications and Radio Engineering. -1998. - No.52 (8). - pp. 118–121.
Huang R. Analysis of open-ended coaxial probes by using a two-dimensional finite-difference frequency-domain method / R.Huang , D. Zhang // IEEE Trans. Instrum. Meas. - 2008. -Vol. 57, No. 5. - pp. 931–939.
Иванов В. К., Силин А. О., Стадник А. М. Определение комплексной диэлектрической проницаемости жидкостей коаксиальными зондами с использованием подложек из метаматериала / В. К. Иванов, А. О. Силин, А. М. Стадник // Вісник Харківського національного університету ім. Каразіна. Серія Радіофізика та електроніка. - 2011. -Т. 2(16), №1. - С. 91-98.
Hosseini M. H. Wideband Nondestructive Measurement of Complex Permittivity and Permeability Using Coupled Coaxial Probes / M. H. Hosseini, H. Heidar, M. H. Shams // IEEE Transactions on Instrumentation and Measurement. - 2017. - Vol. 66, No.1, pp. 148–157.
Hyde M. W. Nondestructive Determination of the Permittivity Tensor of a Uniaxial Material Using a Two-Port Clamped Coaxial Probe / M. W. Hyde, M. J. Havrilla, A. E. Bogle // IEEE Trans. Microwave Theory and Technique. -2016. - Vol.64, No.1. - pp. 239–246.
Cenanovic A. Measurement setup for non-destructive complex permittivity determination of solid materials using two coupled coaxial probes / A. Cenanovic, M. Schramm, L. Schmidt // IEEE MTT-S Int. Microw. Symp. Dig. -2011. -pp. 1–4.
Yee L. K.(2015) Modelling of microwave elliptical and conical tip sensors for in vivo dielectric measurements / L. K. Yee, N. W. Hau, C. B. Kuan, P. Y. Nan, L. H. Sheng, L. E. Hock // IEEE InternationalRF and Microwave Conference (RFM). - 2015. - pp. 222–226.
Abdelgwad A. H. Measured Dielectric permittivity of chlorinated drinking water in the microwave frequency range / A. H. Abdelgwad ,T. M. Said // IEEE 15 Mediterrenial Microwave Symposium (MMS). - 2014. -pp. 1–4.
Wagner N. Numerical 3-D FEM and experimental analysis of the open-ended coaxial line technique for microwave dielectric spectroscopy on soil / N. Wagner , M. Schwing , A. Scheuermann // IEEE Transactions on Geoscience and Remote Sensing. -2014. - Vol. 52, No. 2. - pp. 880-893.
Hyde. M. W. Broadband, nondestructive microwave sensor for characterizing magnetic sheet materials / M. W.Hyde , M. J. Havrilla // IEEE Sensors J. -2016. -Vol. 16, No. 12. - pp. 4740–4748.
Kempin M. Modified waveguide flange for evaluation of stratified composites / M.Kempin, M.Ghasr,J. Case, R.Zoughi // IEEE Trans. Instrum. Meas. -2014. - Vol. 63, No. 6. - pp. 1524–1534.
Думин А. Н. Дифракция нестационарной ТЕМ-волны на открытом конце коаксиального волновода / А. Н. Думин, В. А.Катрич , Н. Н.Колчигин , С. Н.Пивненко , О. А.Третьяков // Радиофизика и радиоастрономия. -2000. -Т. 5, №1. - С. 55–67.
Boybay M. S. Open-ended coaxial line probes with negative permittivity materials / M. S. Boybay , O. M. Ramahi // IEEE Trans. Antennas Propag. - 2011. - Vol. 59, No. 5. - pp. 1765–1769.
Maftooli H. Output signal prediction of an open-ended coaxial probe when scanning arbitrary-shape surface cracks in metals / H. Maftooli, H. R.Karami , S. H. H. Sadeghi, R. Moini // IEEE Trans. Instrum. Meas. -2012. - Vol. 61, No. 9. - pp. 2384–2391.
Wen Mingming. Evaluation of influence of microwave radiation sensor in the form of an open end of the coaxial line on its metrological characteristics / Mingming Wen, Ch. Liu, A.Yu. Panchenko, N.I.Slipchenko // Telecommunications and Radio Engineering. -2015. -No.74(15). - pp. 1355–1366.
Гордиенко Ю. Е. Резонаторные измерительные преобразователи в диагностике микрослоистых структур. Радиотехника: Всеукраинский межведомственный научно-технический сборник. -1996. -Вып. 100. - С. 253–260. Lu Ch. An integral equation for the field distribution within the aperture plane of the coaxial sensor/ Ch. Lu, A. Yu. Panchenko , M. I. Slipchenko // Telecommunications and Radio Engineering - 2016. -No.75(7). - pp. 587–594.
Гордиенко Ю. Е. Вычисление комплексных частот СВЧ резонаторных датчиков апертурного типа / Ю. Е.Гордиенко , A. A. Рябухин // Радиоэлектроника и информатика. - 2001. -№2. - С. 4–7.
Panchenko A. Yu. On the development of a practical technique of theoretical calibration of resonant sensors for near-field microwave diagnostics / A.Yu. Panchenko, N. I. Slipchenko, A. N. Borodkina // Telecommunication and Radio Engineering. -2014. -No.73(15). - pp. 1397–1407.
Панченко Б. А. Тензорные функции Грина уравнений Максвелла для цилиндрических областей / Б. А. Панченко // Радиотехника: Всеукраинский межведомственный научно-технический сборник. -1970. - Вып. 15 - С. 82–91.
Tai C. T. Dyadic Green's functions for a coaxial line / C. T. Tai // IEEE Trans. of Antennas and Propagation. -1983. - Vol. 48, No. 2. - pp. 355–358.
References
Mittra R. (1973) Computer Techniques for Electromagnetics, Pergamon Press, 416 p.
Van Bladel J. G.(2007) Electromagnetic fields, John Wiley Sons., Vol. 19, 1149 p.
Detinko M. B. and Hoptyar C. A. (1993) Elektrodinamicheskaya model SVCH-rezonatora s koltsevyim izmeritelnyim otverstiem, nagrujennogo na mnogosloynuyu poluprovodnikovuyu strukturu [Electrodynamic model of microwave cavity with a circular orifice, which is loaded on the multilayer semiconductor structure], Izvestiya vuzov. Fizika, No.9, pp. 53–58.
Gordienko Yu. E., Panchenko A. Yu. and Far R. S. (1998) Priblijenie zadannogo polya v zadachah opredeleniya harakteristik rezonatornyih SVCH- datchikov aperturnogo tipa [Approximation of a preset field in the problems of determining the characteristics of the resonator of the microwave sensors aperture type], Radiotehnika: Vseukrainskiy mezhvedomstvennyiy nauchno-tehnicheskiy sbornik, Vol. 107, pp. 93–103.
Hyde M. W. and Bogle A. E. (2014) Nondestructive characterization of PEC-backed materials using the combined measurements of a rectangular waveguide and coaxial probe. IEEE Microw. Wireless Compon. Lett., Vol. 24, No. 11, pp. 808–810. DOI: 10.1109/LMWC.2014.2348496
Hyde M. W. and Stewart (2009) Nondestructive electromagnetic material characterization using a dual waveguide probe: A full wave solution, Radio Science, Vol., Issue 3. pp. 1-13. DOI: 10.1029/2008RS003937
Panchenko A.Yu. (1998) Modeling a small aperture resonator type microwave meter of substance parameters, textit{Telecommunications and Radio Engineering}, No. 52 (8), pp. 118–121.
Huang R. and Zhang D. (2008) {textit{Analysis of open-ended coaxial probes by using a two-dimensional finite-difference frequency-domain method. IEEE Trans. Instrum. Meas., Vol. 57, Iss. 5 pp. 931-939. DOI: 10.1109/TIM.2007.913830
Ivanov V. K., Silin A. O. and Stadnik A. M. (2011) Opredelenie kompleksnoy dielektricheskoy pronitsaemosti jidkostey koaksialnyimi zondami s ispolzovaniem podlojek iz metamateriala [Determination of complex permittivity of liquids coaxial probes using metamaterial substrates from], Vіsnik Harkіvskogo natsіonalnogo unіversitetu іm. Karazіna. Serіya Radіofіzika ta elektronіk, Vol. 2(16), No.1, pp. 91-98.
Hosseini M. H. and Heidar H. (2017) Wideband Nondestructive Measurement of Complex Permittivity and Permeability Using Coupled Coaxial Probes, IEEE Transactions on Instrumentation and Measurement, Vol. 66, No.1, pp. 148–157. DOI: 10.1109/TIM.2016.2619958
Hyde M. W. and Havrilla M. J. (2016) Nondestructive Determination of the Permittivity Tensor of a Uniaxial Material Using a Two-Port Clamped Coaxial Probe IEEE Trans. Microwave Theory and Technique, Vol.64, No.1, pp. 239–246. DOI: 10.1109/TMTT.2015.2502242
Cenanovic A. and Schramm M. (2011) Measurement setup for non-destructive complex permittivity determination of solid materials using two coupled coaxial probes, IEEE MTT-S Int. Microw. Symp. Dig., pp. 1–4. DOI: 10.1109/MWSYM.2011.5972838
Yee L. K.and Hau N. W. (2015) Modelling of microwave elliptical and conical tip sensors for in vivo dielectric measurements, IEEE International RF and Microwave Conference (RFM), pp. 222–226.DOI: 10.1109/RFM.2015.7587749
Abdelgwad A. H. and Said T. M. (2014) Measured Dielectric permittivity of chlorinated drinking water in the microwave frequency range, IEEE 15 Mediterranean Microwave Symposium (MMS), pp. 1–4. DOI: 10.1109/MMS.2015.7375497
Wagner N. (2014) Numerical 3-D FEM and experimental analysis of the open-ended coaxial line technique for microwave dielectric spectroscopy on soil, IEEE Transactions on Geoscience and Remote Sensing, Vol. 52, No. 2, pp. 880-893. DOI: 10.1109/TGRS.2013.2245138
Hyde. M. W. and Havrilla M. J. (2016) Broadband, nondestructive microwave sensor for characterizing magnetic sheet materials, IEEE Sensors J., Vol. 16, No. 12, pp. 4740–4748. DOI: 10.1109/JSEN.2016.2548560
Kempin M.and Ghasr M. (2014) Modified waveguide flange for evaluation of stratified composites, IEEE Trans. Instrum. Meas., Vol. 63, No. 6, pp. 1524–1534. DOI: 10.1109/TIM.2013.2291952
Dumin A. N., Katrich V. A., Kolchigin N. N., Pivnenko S. N. and Tretyakov O. A. (2000) Difraktsiya nestatsionarnoy TEM-volnyi na otkryitom kontse koaksialnogo volnovoda [Nonstationary diffraction of THE wave at the open end of the coaxial waveguide], Radiofizika i radioastronomiya, Vol. 5, No.1, pp. 55–67.
Boybay M. S. and Ramahi O. M. (2011) Open-ended coaxial line probes with negative permittivity materials, IEEE Trans. Antennas Propag, Vol. 59, No. 5, pp. 1765–1769. DOI: 10.1109/TAP.2011.2123056
(2012) Maftooli H. Output signal prediction of an open-ended coaxial probe when scanning arbitrary-shape surface cracks in metals, IEEE Trans. Instrum. Meas., Vol. 61, No. 9, pp. 2384–2391. DOI: 10.1109/TIM.2012.2199193
Wen Mingming and Liu Ch.(2015) Evaluation of influence of microwave radiation sensor in the form of an open end of the coaxial line on its metrological characteristics, Telecommunications and Radio Engineering, No.74(15), pp. 1355–1366. DOI: 10.1615/TelecomRadEng.v74.i15.40
Gordienko Yu. E. (1996) Rezonatornyie izmeritelnyie preobrazovateli v diagnostike mikrosloistyih struktur [The resonator transducers in the diagnosis microsloth structures], Radiotehnika: Vseukrainskiy mezhvedomstvennyiy nauchno-tehnicheskiy sbornik, Vol. 100, pp. 253–260.
Lu Ch. and Panchenko A. Yu. (2015) An integral equation for the field distribution within the aperture plane of the coaxial sensor, Telecommunications and Radio Engineering, No.75(7), pp. 587–594. DOI: 10.1615/TelecomRadEng.v75.i7.20
Gordienko Yu. E. and Ryabuhin A. A. (2001) Vyichislenie kompleksnyih chastot SVCH rezonatornyih datchikov aperturnogo tipa [The calculation of the complex frequency of the microwave resonator sensors aperture type, Radioelektronika i informatika, Iss. 2, pp. 4–7.
Panchenko A. Yu. (2014) On the development of a practical technique of theoretical calibration of resonant sensors for near-field microwave diagnostics, Telecommunications and Radio Engineering, No. 73(15), pp. 1397–1407. DOI: 10.1615/TelecomRadEng.v73.i15.80
Panchenko B. A. (1970) Tenzornyie funktsii Grina uravneniy Maksvella dlya tsilindricheskih oblastey [Tensor Green's functions of Maxwell's equations for cylindrical regions]. Radiotehnika: Vseukrainskiy mezhvedomstvennyiy nauchno-tehnicheskiy sbornik, Vol. 15, pp. 82-91.
Tai C. T. (1983) Dyadic Green's functions for a coaxial line, IEEE Trans. of Antennas and Propagation, Vol. 48, No. 2, pp. 355-358. DOI: 10.1109/TAP.1983.1143029
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).