Radiometric quality evaluation of dielectric materials

Authors

  • A. F. Yanenko National Technical University of Ukraine, Kyiv Politechnic Institute, Kiev
  • S. V. Mikhailenko National Technical University of Ukraine, Kyiv Politechnic Institute, Kiev
  • V. P. Kutsenko National Technical University of Ukraine, Kyiv Politechnic Institute, Kiev

DOI:

https://doi.org/10.20535/RADAP.2013.52.59-64

Keywords:

electromagnetic radiation, dielectric material, measurement setup, Absorption, the radiation

Abstract

Introduction. The problem statement. It is neseccary to investigate the chemical composition, density and integrity of the product designing products of special purpose. The control of these characteristics without the intervention of the materialcan is carried out using electromagnetic radiation (EMR). EMR can pass through the dielectric materials and also can be radiated by materials with their heating. The experiments on radiation and absorption EMR capacity of dielectric materials were conducted by authors. Studies. The absorbance method is effective method for the study of dielectric material on the density and integrity. The lower density of the material and the more it damages (cracks, splits), so much worse delay EMR in material. EMR pass through all the solid material, without damage, according to a minority. The radiated ability method determines the chemical composition of the material. The level of radiation is measured using the measurement setup and heating the material. It is found from the results that ceramics pottery better radiates and worse delays EMR, and zinc ceramics, however, worse radiates and better delays EMR.

Author Biographies

A. F. Yanenko, National Technical University of Ukraine, Kyiv Politechnic Institute, Kiev

Doc. Of Sci (Technics), Prof.

S. V. Mikhailenko, National Technical University of Ukraine, Kyiv Politechnic Institute, Kiev

Cand. Of Sci (Technics)

V. P. Kutsenko, National Technical University of Ukraine, Kyiv Politechnic Institute, Kiev

student

References

Література:

Методы и средства сверхвысокочастотной радиометрии / Куценко В. П., Скрипник Ю. А., Трегубов Н. Ф., Шевченко К. Л., Яненко А. Ф. – Донецьк: ІПШІ «Наука і освіта», 2011. – 324 с.

Радіометричний НВЧ-контроль властивостей матеріалів / Куценко В. П., Скрипник Ю. О., Трегубов М. Ф., Шевченко К. Л., Яненко О. П. – Донецьк: ІПШІ «Наука і освіта», 2012. – 348 с.

Микроволновая радиометрия физических и биологических объектов / Скрипник Ю. А., Яненко А. Ф., Манойлов В. П., и др. – Житомир: изд. Волынь 2003 – 408 с.

Golovchanska A. D. Radiometr of microwave ranqe in medical-biological and other aplianes / A. D. Golovchanska, S. N. Peregudov, V. P. Kutsenko // Материалы 21-ой международной Крымской конференции «СВЧ-техника и телекомуникационные технологии». Севастополь – 2011. – Т2. – C. 1015 –1016.

References:

Kutsenko V. P., Skripnik J. A., Tregubov N. F., Shevchenko K. L., Yanenko A. F. Methods and means of microwave radiometry. Donetsk: ІPSHІ "Nauka i Osvita", 2011, 324p.

Kutsenko V. P., Skrypnyk J. O., Tregubov M. F., Shevchenko K. L., Yanenko A. P. Radiometrychnyy microwave control material properties. Donets'k: IAI "Science and Education", 2012, 348 p.

Skrypnyk J. A., Yanenko A. F., Manoylov V. P., Microwave radiometry and other physical and biological objects. Zhitomir: vol. Volyn, 2003,4 08 p.

Golovchanska A. D., Peregudov S. N., Kutsenko V. P. Radiometr of microwave ranqe in medical-biological and other aplianes. Proceedings of the 21st International Crimean Conference "Microwave & TV Communication Technologies." Sevastopol, 2011, vol.2, pp. 1015-1016.

Downloads

How to Cite

Яненко, А., Михайленко, С. В. and Куценко, В. П. (2013) “Radiometric quality evaluation of dielectric materials”, Visnyk NTUU KPI Seriia - Radiotekhnika Radioaparatobuduvannia, 0(52), pp. 59-64. doi: 10.20535/RADAP.2013.52.59-64.

Issue

No. 52 (2013)

Section

Theory and Practice of Radio Measurements

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).