Computation method оf minimal cut sets for fault-tolerant systems based оn structural-automatic model

Authors

DOI:

https://doi.org/10.20535/RADAP.2013.52.38-45

Keywords:

reliability, fault tree, minimal cut sets, structural-automatic model

Abstract

Introduction. The сomputation method of minimal cut sets for fault-tolerant structures based on structural-automatic model is presented in this work. Method. The first step of this method is the development of binary structural -automatic model – formalized representation of system. Structural-automatic model is the data for program ASNA; and the state graph and transitions for the fault-tolerant system are formed in automatic mode. Also program model forms the system of differential equations Chapmen-Kolmogorov and solves it. The probability distribution in each state is gotten as the result of this calculation. Analyzing the list of states the minimal cut sets is calculated. Conclusion. The alternative of fault tree analysis is showed in presented work. This method has automatic event so it is faster then fault tree analysis.

Author Biographies

B. Y. Volochiy, Lviv Polytechnic National University, Lviv

Doc. Of Sci (Technics), Prof.

L. D. Ozirkovskyy, Lviv Polytechnic National University, Lviv

Cand. Of Sci (Technics), Associate Prof.

A. V. Mashchak, Lviv Polytechnic National University, Lviv

Postgraduate Student

O. P. Shkilіuk, Lviv Polytechnic National University, Lviv

Postgraduate Student

I. V. Kulyk, Lviv Polytechnic National University, Lviv

Assistant

References

Література:

Хенли Э. Дж. Надежность технических систем и оценка риска: Пер. с англ./ Э. Дж. Хенли, Х. Кумамото. – М. : Машиностоение, 1984. – 528 с.

Костерев В. В. Надежность технических систем и управление риском. – М. : МИФИ, 2008 – 280 c.

Волочій Б. Ю. Технологія моделювання алгоритмів поведінки інформаційних систем. – Львів: Вид-во Національного університету "Львівська політехніка", 2004. – 220 с.

С. A. Ericson II, Fault Tree Analysis By Design, Proceedings of 16th Interantional System Safety Conference, 1998 – pp. 121 –126,

Rodrigo de Queiroz Souza FMEA and FTA Analysis For Application of The Reliability Centered Maintenance Methodology: Case Study on Hydraulic Turbines / Rodrigo de Queiroz Souza, Alberto José Álvares //, ABCM Symposium Series in Mechatronics – Vol. 3 – P. 803 –812.

Liggesmeyer P. Fault Tree analysis, Current Research Issues, Tutorial / Liggesmeyer P. Kaiser B. //. SAFECOMP 2004, Potsdam 2004.

Singiresu S. Rao Reliability-Based Design / Singiresu S.Rao // Mcgraw-Hill – 1992. – p.569.

Половко А. М. Основы теории надѐжности / Половко А. М., Гуров С. В. // БХВ-Петербург, 2006. – 704 с.

Bouissou, "Boolean logic Driven Markov Processes as an alternative to Event Trees", EDF R&D, Clamart, France – р. 81.

R. Allen Long Variants of Classical Cutsets Characterization, Proceedings of 21th Interantional System Safety Conference, 2003 – pp. 396 –406.

References:

Henly E. Dzh., Kumamoto K. Nadezhnost tekhnicheskih sistem i otsenka riska: Per. s anhl./ E.Dzh. Henly. M. : Mashynostoenie, 1984, 528 p.

Kosterev V. V. Nadezhnost tekhnicheskikh sistem i upravlenie riskom. M. : MIFI, 2008, 280 p.

Volochiy B. Yu. Tekhnolohiya modelyuvannya alhorytmiv povedinky informatsiynykh system. viv: Vyd-vo Natsionalnoho universytetu "L'vivska politekhnika", 2004, 220 p.

S. A. Ericson II, Fault Tree Analysis By Design, Proceedings of 16th Interantional System Safety Conference, 1998, pp. 121-126,

Rodrigo de Queiroz Souza Alberto José Álvares. FMEA and FTA Analysis For Application of The Reliability Centered Maintenance Methodology: Case Study on Hydraulic

Turbines. ABCM Symposium Series in Mechatronics, Vol. 3, pp. 803-812.

Liggesmeyer P. Kaiser B. Fault Tree analysis, Current Research Issues. SAFECOMP 2004, Potsdam 2004.

Singiresu S. Rao Reliability-Based Design. Mcgraw-Hill, 1992, p. 569.

Polovko A. M., Hurov S.V. Osnovy teorii nadezhnosti. BKhV-Peterburh, 2006, 704 p.

Bouissou, "Boolean logic Driven Markov Processes as an alternative to Event Trees", EDF R&D, Clamart, France, p. 81.

R. Allen Long Variants of Classical Cutsets Characterization, Proceedings of 21th Interantional System Safety Conference, 2003, pp. 396-406.

Downloads

Additional Files

Published

2013-04-29

How to Cite

Волочій, Б., Озірковський, Л., Мащак, А., Шкілюк, О. and Кулик, І. (2013) “Computation method оf minimal cut sets for fault-tolerant systems based оn structural-automatic model”, Visnyk NTUU KPI Seriia - Radiotekhnika Radioaparatobuduvannia, 0(52), pp. 38-45. doi: 10.20535/RADAP.2013.52.38-45.

Issue

No. 52 (2013)

Section

Designing of Radio Equipment

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Most read articles by the same author(s)