Combined Electromagnetocrystalline Inhomogeneities

Authors

DOI:

https://doi.org/10.20535/RADAP.2017.71.46-51

Keywords:

electromagnetocrystalline inhomogeneity, electromagnetic crystal

Abstract

A major expansion of the range of wave impedances provide 3D electromagnetocrystalline heterogeneities (ECIs), combining heterogeneities in metallized surface, dielectric and the signal surface of microstrip line. As consequence 3D ECIs as quasi-lumped reactive elements ensure a significant reactivity increasing compared with the conventional structures. The inductor and capacitor may be combined in the construction of ECI, named combined.
The constructions of combined ECIs are proposed. As a model of the first approximation for combined ECI a 1D model based on transmission line is considered. With the help of 1D model analytical results for combined ECI are obtained. A comparison between the efficiency of single and combined ECI using 1D and 3D models is made. 3D modeling is performed in the program package CST Microwave Studio.
Experimental and calculated transfer characteristics of electromagnetic crystalls (ECs) on the basis of single and combined ECIs are presented. Experimental and calculated values of the forbidden zone minimums for ECs on the basis of single and combined ECIs are equal -36, -38, -64 and -75 dB, respectively.

Author Biographies

E. A. Nelin, National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute"

Nelin E. A., Doctor of Sci(Techn.), Professor

Ya. L. Zinher, National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute"

Zinher Ya. L. , M.S., Postgraduate student

V. I. Popsui, National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute"

Popsui V. I., Senior lecturer

References

Перелік посилань

Hong J.-S. Microstrip Filters for RF/Microwave Applications / J.-S. Hong. -N. Y.: Wiley. - 2011. - 656 p.

Bhuiyan M. S. Defected ground structures for microwave applications. Encyclopedia of Electrical and Electronics Engineering / M. S. Bhuiyan, N. C. Karmakar. - N. Y. : Wiley, 2014. - pp. 1-31.

Xiao J.-K. Defected microstrip structure. Encyclopedia of Electrical and Electronics Engineering / J.-K. Xiao. - N. Y. : Wiley, 2013. - pp. 1-8.

Chang C.-P. A 6 : 1 unequal wilkinson power divider with EBG CPW / C.-P. Chang, C-C. Su., S.-H. Hung, Y.-H. Wang // PIER Letters. - 2009. - Vol. 8. - pp. 151-159.

Назарько А. И. Двухфазный электромагнитный кристалл / А. И. Назарько, Е. А. Нелин, В. И. Попсуй, Ю. Ф. Тимофеева // Письма в ЖТФ. - 2011. - Т. 37, № 4. - С. 81--86.

Назарько А. И. Электромагнитные кристаллы на основе низкоомных неоднородностей / А. И. Назарько, Е. А. Нелин, В. И. Попсуй, Ю. Ф. Тимофеева // ЖТФ. - 2011. - Т. 81, № 5. - С. 142--143.

References

Hong J. S. (2011) Microstrip Filters for RF/Microwave Applications, Wiley, 656 р.

Bhuiyan M. S. (2014) Defected ground structures for microwave applications, Encyclopedia of Electrical and Electronics Engineering, Wiley, pp. 1-31. DOI: 10.1002/047134608X.W8203

Xiao J.-K. (2013) Defected microstrip structure. Encyclopedia of Electrical and Electronics Engineering, Wiley, pp. 1-8. DOI: 10.1002/047134608X.W8199

Chang C.-P., Hung S.-H. and Wang Y.-H. (2009) A 6:1 unequal wilkinson power divider with EBG CPW. PIER Letters, Vol. 8, pp. 151-159 DOI: 10.2528/PIERL09032801

Nazarko, A. I., Nelin, E. A., Popsui V. I. and Timofeeva Yu. F. (2011) Two phase electromagnetic crystal. Technical Physics Letters, Vol. 37, No. 2, pp. 185–187. DOI: 10.1134/s1063785011020283

Nazarko A. I., Nelin E. A., Popsui V. I. and Timofeeva Yu. F (2011) Electromagnetic crystals based on low-impedance inhomogeneities Tech. Phys., Vol. 81, No. 5. pp. 142–-143. DOI: 10.1134/S1063784211050252

Downloads

Published

2017-12-30

How to Cite

Нелін, Є. А., Зінгер, Я. Л. and Попсуй, В. (2017) “Combined Electromagnetocrystalline Inhomogeneities”, Visnyk NTUU KPI Seriia - Radiotekhnika Radioaparatobuduvannia, 0(71), pp. 46-51. doi: 10.20535/RADAP.2017.71.46-51.

Issue

No. 71 (2017)

Section

Functional Electronics. Micro- and Nanoelectronic Technology

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Most read articles by the same author(s)

1 2 > >>