Bandpass Filters on Orthogonal Resonators

Authors

DOI:

https://doi.org/10.20535/RADAP.2022.90.31-36

Keywords:

bandpass filter, resonator, transmission line, open-circuited stub, short-circuited stub

Abstract

Introduction. The rapid development of radioengineering, in particular telecommunication, systems leads to a constant tightening of requirements for bandpass filters, and this, in turn, the search for new, more efficient design solutions. In the article, a structure based on two orthogonal resonators (OR) is proposed as the basic structure of a bandpass filter. The transmission response (TR) of the OR-structure and filters on it has been studied.

1 Structure based on OR. The structure consists of two resonators.The longitudinal (relative to the direction of wave propagation) resonator is formed by a half wavelength transmission line section, and the transverse one — by two open-circuited or open- and short-circuited stubs. The TR of the OR-structure has been studied. With a decrease in the characteristic impedance of the longitudinal resonator, the bandwidth of the OR-structure expands. Since the TR zeros near the passband are fixed by stubs, in this case the steepness of the characteristic increases.

2 Filter based on OR with sections. The design of the OR-structure with two additional quarter wavelength sections of the main line adjacent to the OR-structure is considered. This solution leads to an improvement in the side lobes level and a lowering of the requirements for the characteristic impedance values. The parameters of the considered OR-structure with sections are sufficient for its use as a simple filter.

3 Filters based on coupled ORs. The TR of filters based on two and three coupled OR-structures have been studied. The coupling is made by a quarterwavelength section of the main line. The structure of the filter is symmetric, the transverse resonators are identical. Filter parameters: relative bandwidth 20%, ripple in the bandwidth 0.3 dB, sidelobe level –40 and –69 dB, respectively for filter on two and three OR-structures. Parameters of TRs correspond to the elliptic characteristic of the sixth and eighth orders, respectively.

4 Filter with extended suppression bands. The disadvantage of the filter based on open-circuited stubs is the presence of responses at zero and double frequencies. Such responses are absent if in OR-structure one of the stubs is shorted. A filter based on two OR-structures with short-circuited stubs is considered. The filter TR has extended suppression bands.

5 Results discussion. Coupling of longitudinal and transverse resonators in the OR-structure is such that its bandwidth expands as the characteristic impedance of the longitudinal resonator decreases. The high steepness of the TR with zeros in the immediate vicinity of the passband is formed by a transverse resonator based on open-circuited stubs. For a high-rectangular quasi-elliptic TR of a bandpass filter, several OR-structures are sufficient. Proposed structure can be used in filters of various design implementations (microstrip, coaxial, etc.).

Conclusion. In the considered filters the number of OR-structures is equal to 1...3. The parameters of a single OR-structure with sections are sufficient for its use as a simple filter.

The parameters of the synthesized filters correspond to elliptic characteristics of order 4, 6 and 8. The length of the filters is within (1...2)λ00 is the center frequency wavelength) and width — (0.201...0.53)λ0.

The filter based on the OR-structure with a short-circuited stub has extended suppression bands.

References

References

Schaumann R., Xiao H. and Valkenburg Mac E. Van. (2010). Design of Analog Filters, 2nd ed. N. Y., Oxford University Press, 832 p.

Matthaei G. L., Young L. and Jones E. M. T. (1980). Design of Microwave Filters, Impedance-Matching Networks, and Coupling Structures. Norwood, Artech House, 1096 p.

Hong J.-S. (2011). Microstrip Filters for RF/Microwave Applications, 2nd ed. N. Y., Wiley, 656 p.

Tang S.-C., Chu P.-C., Kuo J.-T., Wu L.-K. and Lin C.-H. (2022). Compact Microstrip Wideband Cross-Coupled Inline Bandpass Filters With Miniaturized Stepped-Impedance Resonators (SIRs). IEEE Access, Vol. 10, pp. 21328–21335. DOI:10.1109/ACCESS.2022.3153710.

Barik R. K., Koziel S. and Szczepanski S. (2022). Wideband Highly-Selective Band-Pass Filtering Branch-Line Coupler. IEEE Access, Vol. 10, pp. 20832–20838. DOI:10.1109/ACCESS.2022.3152802.

Tang D., Qian H. J., Dong Y. and Luo X. (2022). Compact 1.75–2.7 GHz Tunable BPF With Wide Stopband up to 9.5 GHz Using Harmonic-Controlled SIDGS Resonators. IEEE Transactions on Circuits and Systems II: Express Briefs, Vol. 69, Iss. 11, pp. 4228–4232. DOI:10.1109/TCSII.2022.3185805.

Sánchez-Soriano M. Á. and Quendo C. (2021). Systematic Design of Wideband Bandpass Filters Based on Short-Circuited Stubs and λ/2 Transmission Lines. IEEE Microwave and Wireless Components Letters, Vol. 31, Iss. 7, pp. 849–852. DOI:10.1109/LMWC.2021.3076924.

Wu Z., Shi G., Lu X., Liang R., Wen X., Wang J., et al. (2021). A W-band air-filled coaxial bandpass filter employing micro metal additive manufacturing technology. Int. J. RF Microw. Comput.-Aided Eng., Vol. 31, Iss. 1, e22768. DOI:10.1002/mmce.22768.

Allanic R., Berre D. Le, Quendo C., Chouteau D., Grimal V., Valente D. and Billoué J. (2021). Switchable DBR Filters Using Semiconductor Distributed Doped Areas (ScDDAs). Electronics, Vol. 9, Iss. 12. DOI:10.3390/electronics9122021.

Lu S., Xu K.-D., Guo Y., Ren Y. and Chen Q. (2020). Bandpass filter using coupled-line-stub cascaded structure with high stopband rejection. Microw. Opt. Technol. Lett., Vol. 63, Iss. 1, pp. 69–74. DOI:10.1002/mop.32555.

Tsukushi T., Ono S. and Wada K. (2020). Bandpass filter with flat passband and transmission zeros using parallel-connected resistor loaded hairpin-shaped resonators. IEICE Electronics Express, Vol. 17, Iss. 22, pp. 1–6. DOI:10.1587/elex.17.20200320.

Feng W., Ma X., Shi Y., Shi S. and Che W. (2020). High-Selectivity Narrow- and Wide-band Input-Reflectionless Bandpass Filters with Intercoupled Dual-Behavior Resonators. IEEE Transactions on Plasma Science, Vol. 48, Iss. 2, pp. 446–454. DOI: 10.1109/TPS.2020.2968481.

Reference Data for Radio Engineers, 4th ed. (1956). N. Y., ITTC, 1121 p.

Quendo C., Rius E. and Person C. (2003). Narrow bandpass filters using dual-behavior resonators. IEEE Transactions on Microwave Theory and Techniques, Vol. 51, Iss. 3, pp. 734-743. DOI: 10.1109/TMTT.2003.808729.

Nelin E. A. and Nepochatykh Yu. V. (2022). Improving Parameters of Resonator on Open- and Short-Circuited Stubs. Visnyk NTUU KPI Seriia-Radiotekhnika Radioaparatobuduvannia, Vol. 89, pp. 48–53. DOI: 10.20535/RADAP.2022.89. [In Ukrainian].

Nelin E. A. and Nepochatykh Yu. V. (2022). Selectivity Increasing of Resonator on Open-Circuited Stubs. IEEE 41st International Conference on Electronics and Nano-technology (ELNANO), pp. 558–561. DOI:10.1109/ELNANO54667.2022.9926995.

Published

2022-12-30

How to Cite

Нелін , Є. А. and Непочатих, Ю. В. (2022) “Bandpass Filters on Orthogonal Resonators”, Visnyk NTUU KPI Seriia - Radiotekhnika Radioaparatobuduvannia, (90), pp. 31-36. doi: 10.20535/RADAP.2022.90.31-36.

Issue

Section

Functional Electronics. Micro- and Nanoelectronic Technology

Most read articles by the same author(s)

<< < 1 2